[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[ccp4bb]: Re: compiling problems on RH6.2
*** For details on how to be removed from this list visit the ***
*** CCP4 home page http://www.dl.ac.uk/CCP/CCP4/main.html ***
Dear Balaji
Sorry that you're having problems installing the suite. When you say
that you have "done this lots of times", do you mean the CCP4
installation generally, or in particular on the laptop? We're not aware
of any problems generally with compiling CCP4 4.0.1 on RH 6.2. But the
warning messages below suggest that maybe there are some problems with
your compiler(s) - apparently they are not installed as default with RH
6.2 - so I suggest checking this first.
Btw your message didn't reach ccp4bb, so you should check that the
address you are subscribed with is the same as the one you're sending
from. You might find that other people have useful comments on the bb
about this problem.
Hope this useful, please get back in touch if you can't make any
progress
Best wishes
Peter Briggs
CCP4.
On Tue, 1 Aug 2000, Balaji Bhyravbhatla wrote:
> Hi all,
> I was wondering if any of you have suggestions regarding the compiling of
> CCP4 ver4.0 on a RedHat 6.2 PC (Laptop). I have done this lots of times
> and have never had problems, but for some reason this time around
> nothing seems to go right!!
>
> Initially there were problems with no finding g2c.h and f2c.h etc. which
> were all fixed. Then I started off again with:
>
> configure --disable-ccif linux
>
> During compilation I get a lot of these:
>
> Reference to unimplemented intrinsic `SIND' at (^) (assumed EXTERNAL)
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekaxis.f: In subroutine `seekaxis':
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekaxis.f:111: warning:
> xyzp(2) = -cenp1(1)/tand(vkapa/2.)
> ^
> Reference to unimplemented intrinsic `TAND' at (^) (assumed EXTERNAL)
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekscrew.f: In subroutine `seekscrew':
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekscrew.f:124: warning:
> b2(2) = sqrt( (1+cosd(vkapa))/(1-cosd(vkapa)) ) * b2(1)
> ^
> Reference to unimplemented intrinsic `COSD' at (^) (assumed EXTERNAL)
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekscrew.f:131: warning:
> ang = acosd( poimult(3,3,b2,b3)/(vem(3,b2)*vem(3,b3)) )
> ^
> Reference to unimplemented intrinsic `ACOSD' at (^) (assumed EXTERNAL)
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekscrewz.f: In subroutine `seekscrewz':
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekscrewz.f:124: warning:
> b2(2) = sqrt( (1+cosd(vkapa))/(1-cosd(vkapa)) ) * b2(1)
> ^
> Reference to unimplemented intrinsic `COSD' at (^) (assumed EXTERNAL)
> /home/balaji/Ccp4/lib/src/lgglib.dir/seekscrewz.f:131: warning:
> ang = acosd( poimult(3,3,b2,b3)/(vem(3,b2)*vem(3,b3)) )
> ^
> Reference to unimplemented intrinsic `ACOSD' at (^) (assumed EXTERNAL)
> rm -f lgglib.dir/*.o
>
>
>
>
>
> And I also see this:
>
> /tmp/ccvJ7gGm.s: Assembler messages:
> /tmp/ccvJ7gGm.s:201: Error: no such 386 instruction: `filds'
> /tmp/ccGI1e3K.s: Assembler messages:
> /tmp/ccGI1e3K.s:133: Error: no such 386 instruction: `filds'
> rm -f plot84lib.dir/*.o
>
>
> And finally it quits with this:
>
> gcc -I/home/balaji/Ccp4/src/solomon_ -I/home/balaji/Ccp4/lib/src -O -DG77 -DPROT
> OTYPE -DHAVE_G2C_H -c -o cmsk_io.o /home/balaji/Ccp4/src/solomon_/`basename cmsk
> _io.o .o`.c
> rm -f solomon; g77 -O -fno-second-underscore -fno-globals -o solomon cmap_io.o c
> map_f.o solomon.o matrix.o cmap_calc.o solmain.o cmsk_io.o -L../lib/src -lccp4
> ld: cannot open crtbegin.o: No such file or directory
> make[1]: *** [solomon] Error 1
> make[1]: Leaving directory `/home/balaji/Ccp4/src'
> make: *** [srcdir] Error 2
>
>
>
> If anyone has seen this and has a solution please let me know.
>
> thanks a lot.
>
> Balaji
>
--
+++++++++++++++++++++++++++++++++++++++++++++++++++
Peter J Briggs, pjx@dl.ac.uk Tel: +44 1925 603455
CCP4, ccp4@dl.ac.uk Fax: +44 1925 603124
http://www.dl.ac.uk/CCP/CCP4/main.html
Daresbury Laboratory, Daresbury, Warrington WA4 4AD
+++++++++++++++++++++++++++++++++++++++++++++++++++